All of my USB ports are full. It was possible to unplug things as I need them, but that was inconvenient. It is also possible to add a USB hub, however my computer is so old that it only has USB 2.0 ports. So, not only was this for convenience but also gives added performance.

One thing to know is that these cards are considered a USB hub. This means that you are not going to be able to charge 7 different devices each plugged into their own port. Cards or ports that perform the full USB capability are significantly more expensive and you may need an upgraded power supply to do so. Investigate specifications based on your own needs.

Here are a few more tidbits. The card that I chose has 5 USB, A-style ports and 2, C-style ports. Part of why I did this was to try and future proof this machine as long as possible. This desktop computer was purchased as a refurbished computer in 2012 so we are going into the 14th year of use. Pretty good as technology goes.

You can purchase cards that have less ports and by proxy they are also cheaper. But again, I was trying to future proof this as much as possible. So my particular card is the value compromise, the most ports for the cheapest cost. Here is how it was installed.

This video was also edited using a new software OpenShot. I am not sure why Microsoft keeps making video editing worse. The old Windows Media editor was the best, then I was using Pictures, and I have played around with ClipChamp. Each version was more difficult to work with then the last. So, I tried OpenShot.

It works fine, but it may not have the features that I actually want still. The transitions are a little clunky and there are no screen or text editors. So, maybe practice is what I need first before I move on to another program. Also, with two videos with my new action camera, the audio is definitely poor. I need to investigate a separate microphone or just relegate this to voiceover type videos.

End Your Programming Routine: I cant say again how much better plug and play life is. Plug the card in and start using it. This is miles from having to assign the drive in the BIOS and then re-install the service pack (for those of you that remember NT). This was after setting the jumpers on the card, etc.