So I found more stuff to test, what are you going to do about it? As I pull my son’s Crossman 760 off of the wall, I saw my Daisy 840 looking all lonely. This was my one and only air rifle until about five years ago.
This was the quintessential air rifle of a country boy. My brother and I had the same model. Many a time, a rope was tied across the barrel and the grip and then off on our bikes or trekking through the fields. Our favorite thing to do was take old catalogs and setup on the deck. We would shoot the catalog for half an hour and then leaf through to laugh at what we had hit on the inside pages. We shot things that we were not supposed to but I think that was a rite of passage and made me the rifle shooter I am today.
Time and kid’s ownership was not good to these things. My brother’s broke where the grip was attached to the action turning it into a stockless rifle. Mine, the spot welds broke on the rear sight leaving it more of a guess than an actual rifle. I was able to super glue it for a couple years but that has long since fallen apart and now lost forever. The forearm is also split where the two plastic halves are joined together. So far, it is still usable.
I first realized that it was time for an upgrade when I had a family of racoons living under our kitchen about five years ago. We were eating dinner on our deck and it was in the tree right next to us. I shot it to try and chase it away. When the BB hit it in the chest, the animal brushed the spot where it was hit and slowly climbed out of the tree and sauntered away. I realized that this was not going to work in a pest elimination capacity. That is when I bought the Crossman Legacy 1000.
The Daisy 840 was a single pump BB/pellet rifle. I did some research on this rifle to see if I could learn anything about it. Apparently, it was made between 1978-1986. It advertised 300 fps. My brother’s came with a scope which was broken within a six months, mine did not. I tested it to see how it was going to compare the the 760 and at first, I was only going to use BBs since the magazine was full. I quickly found out that this thing shot all over the place and my trap was not holding BB’s (when it hit where I was aiming).
| 840 BB | 840 pellet | 760 | 1000 | Optimus | |
| 1 | 263 | 180 | 579 | 775 | 944 |
| 2 | 307 | 248 | 544 | 781 | 942 |
| 3 | 285 | 239 | 540 | 779 | 968 |
| 4 | 282 | 265 | 542 | 781 | 936 |
| 5 | 264 | 257 | 549 | 771 | 938 |
| 6 | 200 | 248 | 541 | 772 | 965 |
| 7 | 180 | 223 | 529 | 774 | 940 |
| 8 | 242 | 223 | 539 | 773 | 906 |
| 9 | 189 | 263 | 552 | 777 | 964 |
| 10 | 132 | 230 | 554 | 777 | 953 |
| 234 +/- 169 | 238 +/- 76 | 547 +/-40 | 776 +/-11 | 946 +/- 55 |
All values were measured at the muzzle and each rifle was pumped to the maximum (1 or 10 pumps) using the Crossman 7.4 grain wadcutter pellet. This was an attempt to compare the maximum performance across the spectrum. The thing that struck me was the inconsistency of the the 840.
Before I get too down on the 840, it needs to be said that this rifle is almost 40 years old and hasn’t been well treated. I am considering trying to do some minor seal maintenance by adding some lubricating oil. There has literally nothing ever done in that manner to the rifle.
Despite that, I was a little shocked when I missed the target multiple times standing five feet away. In all of this testing, this is the only occasion where this has occurred. The difference between BBs and pellets is that only pellets are stabilized (and therefore accurate). But, I was capable of hitting targets fifty feet away in one shot as a youth with a BB. My operating assumption is that the wildly varying velocity is causing the accuracy problems, so we will see.
I also had to double cock the action each time I shot a pellet. I am not sure what that problem is. I didn’t seem to have that problem with BB’s and I don’t understand what the different types of ammunition would have to do with the problem. That is a wait and see problem.
End Your Programming Routine: If my relubrication efforts fail, it may be time to end the run of the Daisy 840. There are no serviceable parts, it is missing a rear sight and I can’t trust the accuracy or performance. A single pump is pretty nice for shooting a lot, even if it is not the most powerful tool. But, if you cant keep the shots within the backstop, it is not safe.
Recent Comments