Now that I broke the seal on my hunting rifle with a new trigger, I got to thinking about another old rifle I have. It is a Remington 722 which is the precursor model to the 700 which puts it likely manufactured in the 1950’s. My dad bought it for my first hunting season, so I would have been 12 years old.

I was hunting with it 20 years ago or so and the swivel came off. I lost it on the gravel so I took it into a local gunsmith. He said that the original part could not be sourced. When I got the rifle back, the gunsmith said that I was lucky. Whoever cut the stock down was lucky that the remaining wood holding the back swivel in hadn’t already split. He moved both the front and back swivels.

My dad cut off some portion of the rear stock so that it was easier for a twelve year old to shoot. He also added a thick recoil pad as the original rubber was pretty cracked up. I have been thinking about giving that old rifle some new life with a upgraded, adult sized stock and a new trigger as well.

Gun fit makes a huge difference in the ability to be accurate. More so than that, it makes a night and day difference in handling recoil as well. I have a youth sized 20 gauge shotgun that just punishes me because it is light and the length of pull is is about 2 inches too short. I wouldn’t let my kids shoot it because it gives terrible bruising to me.

Length of pull is the distance between the trigger and the end of the butt plate. The theory is that the more precise the fit, the better the shooter will be. As I was pricing out a new stock, there was five choices for length. That got me thinking about what length of pull on my other firearms. So, I did an experiment and took some measurements.

Here is what I found measuring various firearms I have.

  1. 14 1/2″
  2. 14″
  3. 12 3/4″
  4. 14 3/4″
  5. 13″
  6. 13 1/2″
  7. 13 3/4″

To my surprise, the cut down rifle is only half an inch shorter than my non-cut down rifle. The truth is, I really don’t need to do anything and it doesn’t feel awkwardly short or give me a recoil beat-down. In my head, I thought that the stock was cut down and so I need to fix that. But, even more surprising is that measurements are all over the map.

Here is another secret about length of pull. Depending on what you are doing, your length of pull can change. What do you mean you say? If you are all kitted up in rain gear and bulk out in the field, that adds girth to the gun fit. So, shooting in the summer with a t-shirt versus hunting elk in the snow is going to make a difference on how much distance is between the butt pad and the trigger.

For working firearms, length of pull is going to be a compromise between optimum seasonal use. Now that I know what I know, I am not sure that I am as worried about the stock being cut down as I was before I started this investigation. Maybe, I will just leave it alone. On the other hand, I have always wanted to build a custom-ish rifle.

End Your Programming Routine: In my opinion, length of pull is more critical with shotgun sports. You tend to shoot much more so you are more prone to recoil and consistency because you are moving and shooting. That being said, a stock that is significantly too short or long is also a problem. Fine gun stores, gunsmiths or shooting instructors can properly measure you for a definitive answer. Maybe I should shell out the money to get a proper measurement instead of guessing and wondering?