I needed another cordless tool-set like I needed a hole in head. I have an old Craftsman 14.4V drill, Makita 14.4V drill and Makita 18V drill and impact driver already. But, I wanted a second impact driver for one in the house and one in the shop. I thought that a smaller form factor would be the right approach rather than adding another 18V tool.

This actually all started several months earlier. I don’t like to admit this on multiple fronts but I started thinking that I wanted a power screwdriver. My wrist occasionally bothers me when I put together all of the boxed furniture my wife purchases. This has become especially true since I have been battling this neck injury. I did some research and there were a few, good options out there but the battery platforms were all lower voltage than the tools I had.

The Milwaukee brand screwdriver had high ratings and they offered a lot of other tools in the same battery platform. Once purchased, I had the green light to buy tools from a different line. Another benefit was that local hardware stores carry their tools and batteries. Of course, a lot of the above jibber jabber was written in early October before we decided to move. So throw that logic out the window.

What I mean to say is that there is an argument for owning both the 12V and 18V platforms. The smaller form factor of 12V tools are more compact and cheaper than their 18V cousins. It really doesn’t matter that they have less run time (my experience) and homeowners need one hole or is installing one shelf and not pounding screws all day long every day.

When I compare my 18V Makita to this new 12V Milwaukee setup, I really do feel as though the Makita is superior. They batteries run longer and hold charge for literally months without me touching them. That said, the Milwaukee has plenty of power for the around the house use when charged and ready to go. I have noticed a significantly faster, dormant discharge rate of the 12V batteries. I am still looking to quantify how much better in my long term ownership of these new tools. But what I can say is that every battery was fully charged when I put it away and a month later the batteries are showing half charge.

If you will recall, at one point I was considering becoming a contractor or something in the construction field. One reason I have multiple tools is to have them in different places at the same time. I could leave tools at the job site (securely of course) and still have enough resources at home to do the things that I need. It goes with a similar philosophy of having tools in the shop as well as in the home. Let us be honest, no homeowner really needs more than one battery operated drill unless it is special circumstances like building a deck with multiple helpers. The prudent thing would be to see if a tool could be borrowed. But, I am also kind of lazy and don’t like to run to the shop 100 times for everything that I need to do a job. Adding a second pair just shortens my trips to the basement instead.

One tool that I find I use a surprising amount is my corded multi-tool. This thing is amazing, especially for fine, finish type work like scribing or precision demolition. When trying to precision cut an 8′, T-111 panel it is a pain to try to manipulate a cord and be on the ladder at the same time. I would desperately like to get a cordless version but as handy as it is, I need a justification to spend $250. But, if I look at the Milwaukee 12V version, it is only $100. I think that I could probably justify that for almost any project. Yeah, it is not going to run all day but I already have a corded version that can do that. This would be to trim up one molding spot to slide a floor tile for a finish cut without moving furniture to get to the outlet.

I would argue that for most homeowners, the 12V is more than adequate. I wouldn’t even recommend going to 18V just to get the extra benefits given the cost. I have been extremely impressed at these tools considering my last 12V experience was in the Ni-Cad battery days. This was when you needed the higher voltage tools just to have adequate power.

End Your Programming Routine: My son asked, why Milwaukee and not Makita? They also have an extensive 12V line. The real answer is that they had the screwdriver I wanted but he also doesn’t know that I have been a Milwaukee fan since before I owned the Makita cordless tools. I have a number of corded tools from them and I think they are equally good in their own right. It is hard to justify another battery platform unless there is a distinct advantage like dipping into another tool line that meets your needs.