One of the first lessons I learned when we moved into this house was that keeping firearms in the basement, left unattended started to rust. I looked into several options. The one I eventually chose was long term storage bags (kind of like giant ziplock bags). Each time I handled a firearm, it would get a heavy buff with a silicone product called Barricade. That seemed to protect them once I started doing it.

With this new safe, I didn’t want to use the storage bags. My safe has a a power strip inside of it and I wanted to take advantage of that. I do still plan on wiping them down after handling. I took a very poor picture to highlight some of the accessorizing that I chose.

You can see how bright it is. This is because I installed some LED strip lights. These are multi-purpose light kits that can be used under cabinets or even gun safes. I don’t think lights are really necessary unless there is a lot of stuff in there. Then it starts to get a little more helpful. But, I wanted to pimp out my safe.

The black caps on the floor are covering bolts that I drilled into the concrete. The safe manufacturer recommends at least two bolts. I did four. Now, I thought that I was already paying for this with delivery and installation. As I pointed out last week, nope.

Aside from keeping valuables safe, you also want to protect them from the environment. You can barely see it at the lip of the door, but I added a heating element. This is supposed to drive air circulation within the safe. And with circulation, there is less chance of rust. I will be testing that out for sure.

The white item on the upper left is some rechargeable desiccant. The balls within absorb water vapor. They have some kind of magic that changes from purple to pink when they need to be recharged. To do that, there is a plug on the back of the case and you plug in the device until it is dried out.

The tiny sliver of black you see at the top/middle is a remote hygrometer/thermometer. You probably know that I am a data junky. I want to see what it happening with temperature and humidity more so to get a sense about how the heating bar and desiccant are working. I already had one in my shop so I swapped this new unit in for the old one and now I have a monitor in the basement.

It is already yielding interesting data. It is typically a degree warmer inside and a couple of percentage points higher in humidity. It could be that the sensor for the inside has a different calibration for the sensor on the outside. Or, I suspect that this moving air and desiccation is actually drawing moisture into the safe. I am going to keep an eye on that.

These were the accessories that I chose. There are other variations of lights and moisture measurements. I have even heard of motion detectors to alarm you if someone is trying to access the safe if you are not around. You can purchase various pistol racks and over the door hangers as well. Mine comes with a factory door hanger so I didn’t need that. But that is it.

End Your Programming Routine: If it is cars, boats, computers or safes accessorizing is the way to make things our own. Despite the fact that I am no where close to filling it up and probably never will, it gave me a lot more breathing room in my former cabinet. Since I have been reloading, I have run out of room to store all those plastic boxes and shotgun shells for trap season. Not just storing them but getting to specific loads is a chore having to pull everything out to find something. This day was a long time coming.