Month: August 2022

August 31, 2022 – Shop Siding, Before and After

August 31, 2022 /

It is a good thing that I am done because summer is almost over. I ended up finding more rot in the facias and I debated leaving it. Ultimately, I decided that I had everything setup and I was in the mode, so I ended up spending a full day taking care of the unexpected damage. But, it is done.

As I like to do, I thought that I would provide some project accounting. What did this project really cost?

Hardware$111
Paint$45
Siding$555
Lumber$34
$746

I did spend more than this, but they were unrelated costs to the project. They were expenses for my home and apartment that I picked up because I was already at the store. It is possible to argue that I may not spent the money if I wasn’t already purchasing project supplies.

I wish that I had kept better track of my actual hours. I should know that I am going to write about it by now. I am just going to have to make an guess at this point.

SidingDemo12
SidingSheathing/underlayment10
SidingPainting26
SidingInstallation12
SidingFinish5
SidingMaterials Purchase15
Siding Subtotal80 hrs
FaciaAll work20
Total100 hrs

My biggest labor expense was in painting. I did paint everything by hand and every exposed surface got a primer coat and two topcoats before installation with touch-up afterward. Had I installed everything then shot it with a sprayer, I am sure that I would have driven that cost down to 8 hours. I also feel like some of my trips for materials were wasteful. I had to replace the Hardi boards that broke as I was unloading and I made one trip to purchase a 15 degree finish nailer plus caulk (more on that some other day).

I am giving myself a raise on this project because of inflation. If I estimate my rate at $35/hour then my labor is $3500 and my overall cost is $4246. A smart contractor is going to add some contingency to the job, like 20%. I would estimate the overall value of the project to be $5000.

End Your Programming Routine: The project actually totaled more time than I expected. It was the painting phase that seemed to really drag on. Of course, most weekends I spent some time but not really sun up to sun down or even a straight eight hour day. The truth is, I didn’t really feel like I needed to work that way. But now, I need to move onto other things while the weather is still good. It feels good to finish however.

August 30, 2022 – Rodeo Season is Winding Down

August 30, 2022 /

I don’t think that I have ever talked about Rodeo before. Before I get started, I don’t want to leave the impression that I am some kind of poser. I have never attempted to ride bulls or broncos and I don’t know how to rope or steel wrestle. Despite that, I do have respect for the people that do this.

The origins of American rodeo come from cowboys and working the ranches. But, the truth is is goes way back to Rome. This is the modern day form of animals and humans in the colosseum together. American rodeo has it’s set of events but there are other countries that have theirs. Ours tend to focus on buckles and prize money while others bring a focus on horsemanship with fancy stepping horses marching in unison.

This particular rodeo we went to was called a rough stock rodeo. This means that it was an abbreviated event. A full rodeo would include steer wresting, calf and team roping which the winners are based on the quickest time to complete the events. A rough stock rodeo is the bull and bronco riding (for some reason this one also has barrel racing as well).

The object to riding an animal is to hang on for eight seconds. If that happens, then the two are scored up to 50 points for the animal and 50 points for the rider. The nastier the animal is with bucking and twisting, the higher the score. For the rider, spurring front to back and keeping one hand in the air lead to points deductions for technique. With that, the best score wins. This means that there is some luck in this as well as skill.

When I was a youth, the Fourth of July was unofficially called Cowboy Christmas because there were so many concurrent rodeos happening. In my area, there were three big ones which would draw bigger names because the could compete in all three and therefore enhancing chances with a bigger payday.

Most venues are outside making summer the primary season for rodeo. The biggest one to my knowledge is the Calgary Stampede which runs for two weeks in September. That is one that I would like to see. The official commencement of the year is the National Finals Rodeo in Las Vegas in February. That is an organization like the PGA that requires membership and has it’s own rules for participation and qualification.

The one that we attended was at the Oregon State Fair. We specifically went to the fair to watch the rodeo and the concert by Ned LeDoux afterward. We are planning to go back to see anything else at the fair since this took our entire evening. It is pretty common to see food, games and a carnival atmosphere associated with rodeos. It is an entire entertainment experience, not just a spectator event.

With TV series like Heartland and Yellowstone, I think that there is a resurgence or new awareness of rodeo. This is one of those pursuits that can be very dangerous. And you don’t see old rodeo cowboys. It is just too physically damaging to ride bulls and horses for long. Actually, I think the roping sports tend to be older guys because it takes a lot more skill to do it and it is not nearly as physically damaging.

End Your Programming Routine: I like putting on my boots and hat to go out and watch the rodeo with my wife or family. Stick and ball athletes may be strong or fast but cowboys are tough. The whole process requires desire. The desire to travel and live on the road, the desire for a chance to complete for mostly peanuts as wages, the desire to be the best at a life threatening pursuit. It is a culture and a lifestyle that I enjoy participating.

August 29, 2022 – Back To School… Drama

August 29, 2022 /

My kids are a little over a week away from starting school again. You can listen about the drama that I am talking about. I was going to use this slot to tear a new one into the school system but as I was writing the outline, I thought that I could turn that around into something more constructive. So, that is what I did.

End Your Programming Routine: I think sometimes that if we don’t think critically about a situation, we can forget our power and role in the situation. Change your mindset so that it is not what the world is doing to you but how you respond to the world. That is mastery of yourself.

August 26, 2022 – Atlas Shrugged 1:8

August 26, 2022 /

This book is rapidly earning a spot on the reading list. I suppose you could say that I enjoy a story with a bunch of subversive subplots going on. I also appreciate a long and intricate story. If a book is going to be short like Animal Farm, it very well better get to the point and quickly. Animal Farm is going on the review list too, I have a couple others ahead of it first.

There is a lot going on in this chapter that is relevant to the current story lines in the plot. In fact, it is probably an end to the most controversial issues to date. I didn’t recognize that there were a lot of new concepts however. I am not sure where things are going from this chapter other than there is sure to be more interaction between Frank D’aconia, Jim Taggert, Dabny Taggert and Henry Reardon.

In the first, third of the chapter, we have the Equalization of Opportunity bill in action. Reardon ends up selling his different business interests to individual industrialists. Some of them are consolidating operations and others seem to be friends. It is clear that many industrialist are not happy with the status quo, but we get a glimpse into Reardon’s character. He will fight for his business in management and the marketplace but not in the political arena.

In the second, third we have more doubt on the John Galt Line. Dabny holds a press conference, concerning the near completion of the line. We have the same battle lines with the media saying it is going to be a disaster and the normal folks betting on success. The third, third of this chapter had the first run on the John Galt line. Of course it was successful, what did you think was going to happen?

So, lets talk about the media and misdirection or agenda pushing. Did anyone hear about the Inflation Reduction Act 2022? If you see the title, you would think that this is an attempt to actually reduce inflation. Despite the fact that the government is claiming there is no recession and inflation is minimal, why would we need to reduce inflation?

You can follow the link above to see what is actually in the bill (on a summary level). But, if you ignore the actual details and just look at the cost summary, you will see that this is touted as a deficit reduction. How is this actually done? Primarily there are some rebates that are terminated and taxes are raised on corporations.

Let us look into the bill for a minute. The ‘benefits’ of the bill are targeted toward climate change and health care rebates and changes. Now, if we take the name of the bill at it’s face value, how in the world are these things related to inflation reduction? I really don’t have the time and/or space to discuss how inflation works. But, simplifying inflation for a quick bite: inflation is driven by the federal reserve (non-governmental entity of member banks) increasing the money supply and this is done through fractional reserve banking. I hate to break this to you readers, but inflation is actually desired by the government because this is how the federal debt is financed. Older (more valuable) debt is payed with less valuable money.

Circling back to the media now. We have the useful idiots parroting all the great inflation reduction that we are going to see just like the media is publishing false information sourced by the State Science Institute in Atlas Shrugged . We are going to do that by raising taxes on the rich and giving money to people to buy electric cars, all the while the national debt is reduced. Huh, I can’t make the connection.

End Your Programming Routine: Pick your issue here. Trump has nuclear secrets at his home, the election was stolen, there is no inflation, stay home and save lives, two weeks to flatten the curve, get your vaccination to do your part… lies. I don’t like to talk about politics this definitively but if you are wrapped up in the BS that is being fed, then you are a drone. The government is going to do what they are going to do. We the people need to focus on things that matter to us. The political circus is still happening every day, don’t go.

August 25, 2022 – ‘Tacticool’ Thursday

August 25, 2022 /

Bonus! I know that I said only one more in this line but I wanted to know something else while I started testing. My son has a Crossman 760 that I was curious how it compared to what I was doing.

The 760 is to prototypical first air rifle. It is affordable and ubiquitous. Most people I knew had one growing up. It can fire BBs or pellets and pumps from 1 to 10 pumps for variable power. Think of it as a value proposition, it is the most bang for the buck.

As all youth’s air rifles do, this particular one has a history. My wife and son bought it at an auction for the private school my kids were attending years ago. They paid probably double what it was worth but they won. My son was very excited at the time. However, it has mostly sat in the corner since the initial outing at the range. Here is the data that I found.

7601000
1579775
2544781
3540779
4542781
5549771
6541772
7529774
8539773
9552777
10554777
Average546 +/- 40776 +/-11
All data in fps

I was surprised to see that the 760 is significantly less powerful than the 1000. This was a new pellet, the Crossman 7.4 grain wadcutter, ten pumps each measuring the muzzle velocity. The data for the 1000 is part of the new data set I am doing in my number of pumps vs. velocity analysis coming next week.

The boxes are long gone. I really don’t know what the published velocity is supposed to be. According to today’s literature the velocity is 350-700 fps for the 760 and 750-1000 fps for the 1000. Those numbers are going to be subject to the weight of the pellet as you have seen from my previous data.

I actually have one more BB gun to look at which I will do in a couple weeks. I haven’t done any testing with BBs but since I was checking the catalog of performance, I was curious. I will talk all about that then.

End Your Programming Routine: I have to say, the 760 is much easier to pump than the 1000. I have a feeling that the longer forearm on the 1000 is an indicator that the air chamber is bigger, hence how to get more velocity. I am much preferring my break barrel spring air rifle to pumping 10 times to get similar velocity. But, for a kid this is a fantasy come true.

August 24, 2022 – Review: Porter-Cable FR350B

August 24, 2022 /

It’s been a long time since I did a proper review. Part of what holds me back is I want to get some use out of something before I give it a one day run and then write about it. For example, I have gotten enough use with my Crossman Optimus that I should be able to speak with some authority on that product. Ideally, I would also like some experience with multiple models as well so the review is not in a vacuum.

Before we get completely immersed in this review, I wanted to talk a little bit about the Porter-Cable brand. It wasn’t that long ago that Porter Cable was a premium brand. In 2004 Delta Machinery was acquired by Black & Decker (parent company of DeWalt as well) and it seems like it has been relegated to to value brand. For instance, the FR350B was about 50% cheaper than the comparable DeWalt nailer.

Truth be told, I really wanted to buy a 15 degree siding nailer but I simply couldn’t justify the $350-400 price tag for my one wall project. I probably should have bought it 2 years ago when I did my remodel job. At that time, I justified that I didn’t need to spend any additional money. When I did my office project, I decided to splurge and buy a framing nailer. I no longer needed to prove anything to anyone after my apartment remodel.

What I realized was that instead of buying a siding nailer, I could do the job with the framing nailer I already owned. There are shorter, thinner, ring shank and galvanized nails that would work just fine. My only real gripe is the plastic collation remains visible after driving the nail. Lap siding is covered by the overlapping the above course. For my project, I picked and scraped the worst offenders on the T1-11 but this would never do in a pay for, job situation. And that really has noting to do with the nailer itself.

This particular nailer is a 21 degree nailer which can shoot between 2 and 3 1/2 inch nails. It would appear that there are other nailers on the market that have a more severe angle (that is the angle of the magazine to the tool) which in theory allows more access in difficult or tighter situations. I think that the 21 degree angle is the most common. It comes with the hose connection already made and a rafter hook attached.

Make sure an know your application so that you can also get appropriate nails at the same time because those are not included. Manufacturers have come up with a color coded tag to match the proper nails to the nailer. In this case, mine has a maroon 21 degree tag on it that matches the label on the box of nails. The other way to match nails to the nailer is buy the same brand nails/nailer. This is not a guarantee but it is a way but it is much more likely.

ScoreProsCons
Value3-50% less than competitors
-Nails cost significantly less $40/1000 or roughly $2/lb vs. $6/lb loose
-Comes without a specific case (to me that is a plus)		-Still Paid $180, that buys a lot of nails
-In my frequency of projects, an unnecessary luxury
Quality3-Operated on two projects without misfire
-The way the air port ejects exhaust is often in the face. It is adjustable however it seems to be frequently in the wrong location
-Mechanism seems bulkier than others I have handled
-When nail magazine gets to about 5-7 remaining, needs to be reloaded to operate
Performance5-Much easier to work alone
-Significantly faster than hand nailing
-Can make nailing in tight or difficult positions possible		-Easier to make compounding mistakes
-More difficult to tell if you missed the framing

It is not fair to review on speculation. However, I have gotten lots of comments on my nailer rebuild video that newer Porter-Cable nail guns will not last. I don’t know if that is true or not, but there has to be some kind of compromise for the price. I guess time will tell.

There are cheaper tools out there particularly online and at a national tool store we all know. To me, this was the lowest price point I was willing to go. I am a big believer in you get what you pay for. Often times, inexpensive items do the job for a while, but the value is in the durability like softer alloys, inferior batteries, no serviceable parts, etc.

End Your Programming Routine: The truth is, I really didn’t need this tool at the time I bought it and I didn’t need it here either. But, I have done this work several times and trying to do it by yourself is difficult. To top it off, it seems like some brands of nails don’t have as much integrity. With one brand of nail, I was bending and pulling 2 nails for every one that I got in. Also, hand nailing into Hardi siding is doubly difficult. I am positive that I will have other projects that I will use this for. However, sometimes the setup is not worth the effort, so keeping a hammer around and knowing how to use it can be a better and easier strategy.

August 23, 2022 – Self Reliance Magazine

August 23, 2022 /

Let the cheapness flow. Last Tuesday, I wrote about Backwoods Home Magazine, today I am reviewing the companion publication. The story as I understand it was that the kids of the publisher started this magazine. I am presuming the strategy was to leverage the name of Backwoods Home to kickstart this one.

My interpretation of the mission statement is similar content, less controversial. Of course, less controversial is subjective. What is missing is content on firearms and politics. My one look at Backwoods Home, I saw some of those two but really very little; I would say two columns. Nevertheless, as promised it is not here.

Below is a look of the contents of Self-Reliance Magazine.

  1. Tips on watering your Garden
  2. The front porch concert
  3. From tree to table: Harvesting black walnuts
  4. The jitter free cafe (coffee substitutes)
  5. How to build a bee house
  6. 11 building mistakes
  7. Protecting canning jars during an earthquake
  8. Natural Goat Horns
  9. Homeschool vs. online school
  10. Blueberries for all of us
  11. Sew a ram apron
  12. A primer on zippers
  13. Grain Sack Totes
  14. The complicated world of corn
  15. Foraging farther off the grid
  16. Making crock pot yogurt
  17. Healthy, heart smart Greek cuisine
  18. Six soulful smoothies

In many ways, I felt like I was reading an extension to Backwoods Home. Most of the subject matter was the same and even authors/columnist cross back and forth. I felt like Self-Reliance had additional food and crafts to make up for the content the parent publication has. It is probably subconscious because I knew this before I started but I felt like the the overall tone was subdued compared to Backwoods Home.

From this, I am interested in trying to make yogurt, I thought that there was some good advice to secure canning jars and the Ram apron was an eye opener. This is a device to prevent the ram from breading when it is the time of year. The zipper article offered some tips on mending and it confirmed some things that I thought I knew.

Maybe I shouldn’t admit this either but I have my eyes open for picking up a second hand sewing machine because it is so much easier and better than sewing by hand. I have sewed a number of patches on my kids Boy Scout Uniforms and it takes a long time. Ideally, they would show some initiative and do this themselves but I could see some value in mending myself.

End Your Programming Routine: I am strongly considering subscribing. If I do, there is a deal to get both in the same transaction which is what I will do. That being said, if I only could pick one it would be Backwoods Home over Self-Reliance. It just felt more like me. There are several publications that are pretty similar as well like Grit and Mother Earth News come to mind. The extra spicy Backwoods Home is a differentiator.

August 22, 2022 – Summer 2022 Status Report

August 22, 2022 /

There are a lot of twos in this title. As fall is right around the corner it hit me that we are trending toward the year wrapping up. It is nearly over 2/3 over. With summer ending and fall in sight, I felt like I needed to take stock of where I am at with things.

End Your Programming Routine: Goalsetting is integral to getting stuff done. I don’t get too down not meeting my own expectations as this is a busy family season in life. I don’t want to totally dwell on the downside because I got stuff done too. I think the key is to improving is to do a more frequent goal assessment and do things in the right order. I am looking to get better at that.

August 19, 2022 – Atlas Shrugged 1:7

August 19, 2022 /

This was a long chapter, over 50 pages. It was really a tale of two sides. The first being the State Science Institute denounces Reardon Metal, contractors/suppliers quit, unions refuse to work with it. The other was Dabny creates the John Galt Inc as own contracting company. Orders are exploding for Reardon metal because other suppliers have failed. So, in other words we have the state and media saying one thing and people doing the other… sound familiar?

Once again we hear another John Galt back story. This time he found the fountain of youth. It seems that John Galt is a mysterious character that no one really knows anything about. I know for a fact that we are going to continue to learn more about him but we will just have to wait for that to be revealed.

Also, another significant event happens, the Equalization of Opportunity bill passes. If you remember from last week, this is the statute that only allows a person to own one business. In theory, this is going to prevent industry vertical integration. With all of the supply chain issues, I am sure that this is going to have a negative effect on Reardon Metal.

The rest of this post I am going to focus on the smear campaign against Reardon Metal. There were lots of interesting quotes in the interaction between Dr. Robert Stadler of the State Science Institute and Dabny however, I chose these two. “Set science free of the rule of the dollar.” “And when we deal with people, considerations other than the truth enter the question.”

Now, taking it one at a time. Once again, there is this higher level thought that science should be free from the influence of money. As an educated scientist, I can say that attitude is really still pervasive within the educational doctrine. It is not so much the case on the front of research. You see, it take money to perform ‘research’ and institutional budgets are not adequate. This means that industry is funding academic studies. At that point, the outcome is likely tainted because it is not an impartial hypothesis.

Stadler proclaims that the sole purpose of the Institute is to create cutting edge materials research i.e. invent new products. Since this is a publicly funded venture, he is concerned that his entity will be judged for little to no output. And to make matters worse, Reardon Metal is the technological biggest breakout in the current era. Therefore, slander on the metal is an attempt to save his own reputation. Aligned with him are all of the lazy industrialist that have a comfort in not having competition.

Like the Betamax/VHS debate of the mid-1980s, the best product (or truth) isn’t always important. Sometimes when something dominates the market, then it doesn’t matter if it is the best. This is not what Stadler was inferring with his statement. He was actually saying the opposite. It is OK to lie to the public when it is in their best interest.

I like to call that the ‘better-than-you liberal’. There is something about the arrogance of people that have this prevailing opinion that the ends justify the means. Whether it is a mask or vaccine judgement or you don’t announce your pronouns or you don’t have a Ukraine flag icon on your social media it has the feel of judgement to me. Remember, even if masks don’t decrease the risk of transmission, it can’t hurt to require people to wear them.

End Your Programming Routine: I am open to being wrong, but this is the behavior I have observed from the left side of the political spectrum. The difference with the right side is they are always saying “what you should do is…” or “they ought to…”. If you recall, I choose neither. I am perfectly OK that you think that you were born a cat or the earth is flat; I am not going to respect that but that is your right. Once again, examine the motivations of the source of data or opinions to get the appropriate understanding for yourself.

August 18, 2022 – ‘Tacticool’ Thursday

August 18, 2022 /

We finally get to the whole reason for doing weeks of testing today. My initial question was what difference does the pellet weight make in energy. Or said differently, what pellet would be best to eliminated pests. Is a heavier or lighter pellet better? My opinion is that the highest energy pellet is the best. To calculate that, I need to know the velocity of the different weight pellets.

On the left is the Crossman Powershot 5.4 grain and on the right is the Gamo Rocket 9.6 grain. You might recall to date, all testing has been done with various models of the Gamo 7.54 grain pellet. An interesting anecdote about the Powershot is that I was reading reviews about it and apparently can penetrate 16 gauge steel in the right circumstances. I bought it because it was light, for comparison purposes.

5.4gr Muzzle5.4gr 30′7.54gr Muzzle7.54gr 30′9.6gr Muzzle9.6gr 30′
1006879942849864797
1028884946853855777
1028901966866855785
1005904959859857798
1040875953855847795
1007880952870848784
1049913973852840793
1039885947853852787
1027895951868840786
1036903966858844791
1026.5 +/-46.9891.9 +/- 38.9964.6 +/- 19.5857.3 +/- 22.2850 +/- 23.4789.3 +/- 20
All values in fps

Why do I keep measuring velocities at two different distances? I am hoping to get enough data that I can calculate (or guess) velocity at distance and have an educated guess at performance with one measurement. Using formulas I have discussed in the past, here are the results in energy at target distance.

5.4gr 30′7.54gr 30′9.6gr 30′
9.5 12.313.2
All values in ft*lbs

From the data, it would appear that my hypothesis is correct for my assumption. The 9.6 grain pellet has the most energy at target range. Therefore, this would be the most effective pellet for pest control.

I want to point out that energy should not be the sole determining factor in selection of ammunition. Barrel rate of twist can only stabilize projections within a certain weight range. That really translates to accuracy and consistency. There are additional considerations for wind drift as well. The lighter the pellet, the more likely wind is going to effect point of impact as well. That variable is more difficult to test, but it is a known fact. Finally, depending on the distance of the target and the overall velocity, pellets drop based on the rate of gravity, so the slower the pellet the more drop at distance making aiming (and accuracy) more difficult.

End Your Programming Routine: I hope that you have enjoyed my mini-series on pellet ballistics. I have learned a lot as well as re-awakening some long dormant brain cells on math. I will be back from time to time with this line of writing because I have thoroughly enjoyed the process and I have the tools to do it now. I have one more test in this line to complete but it is going to take a bit of effort to finish. For now, I am coming back with something different next week.